The hot-melt machine can be used for taking over after the power is turned on and the working temperature indicator light is on; the pipe is cut according to the required length, and the end face of the cut pipe should be perpendicular to the axis of the pipe; the burrs and burrs on the cut end face should be removed; Clean, dry and oil free. If necessary, clean with dry cloth or acetone; use calipers and a suitable pen to measure and mark the socket depth at the insertion end of the pipe; guide the insertion end of the pipe into the heating jacket without rotation, insert it to the marked depth, and at the same time , push the pipe fittings onto the heating head without rotation, and reach the specified mark; after the heating time is reached, immediately remove the pipe and pipe fittings from the heating head at the same time, and insert them into the marked depth quickly and evenly in a straight line without rotation.
